Gunsmithing

 
 
DSC09382.JPG

Barrel Cutt Off and Crowning

$75

This service includes removal of barrel from the action if necessary, cutting the barrel to length, crowning and re-installation of the barrel.


Barrel Threading

$89

This service includes removal of barrel from the action if necessary, threading and re-installation of the barrel.

DSC09375.JPG

15542083_1350259435004356_2343429659776743977_n.jpg

Duracoat Service

$89

I can Duracoat a firearm in a color that you request as long as it is a standard Duracoat product. The base labor price is noted above for standard Duracoat products. It includes taping, part preparation and finishing. There will be a small up charge for Duracoat products that cost more to purchase. Be aware that a rifle cannot be assembled until 24 hours after finishing and will not fully cure for approximately 3 weeks. It is very important to be gentle and take care not to damage the finish during the curing period.

DSC09392.JPG

Short Chambering Service

$199

This service includes installing a short chambered barrel to a receiver, finish reaming the chamber and ensuring that proper headspace is set.  The chamber will be slightly polished to avoid sticking, but not so much as to create an excessive back thrust situation.

Barreling Service

$349

This service includes cutting to length, threading of the barrel shank, rough chambering, finish chambering, installing and headspacing the barrel.  It also includes cutting and crowning the barrel. The chamber will be slightly polished to avoid sticking, but not so much as to create an excessive back thrust situation.

DSC09386.JPG