FOWLER PRECISION FREE FLOAT AKM

$2100.00

(SOLD: NO LONGER AVAILABLE)

This factory new rifle build is composed of all new US Components, with the exception of the rear trunnion and gas block which are Russian SAIGA parts.  It has all matching numbers and has US selector markings.  The Bolt, Carrier and front trunnion are forged and manufactured by Toolcraft (Major military M4 and M16 BCG contractor and one of the top providers of multiple OEM AR15 BCGs. AK components built to AR Mil-Spec standards).  The barrel is a new chrome lined Green Mountain barrel.  The muzzle device is a Dead Air Armament Keymount Flash Hider.  The FREE FLOATING front handguard/gas tube/rear sight block is made by OCCAM Defense.  The AR15 stock adapter is made by Rifle Dynamics.  The trigger group is a tuned 2 stage ALG Defense Enhanced AKT-EL trigger group.  The buttstock is a Magpul CTR carbine stock and the pistol grip is by Tango Down.  All rivets are flush with the receiver and properly formed.  The receiver rails are smooth and work properly with a tilt test.  It has a trigger and hammer pin retaining plate.  Finally, the rifle has a Cerakote finish in Midnight Bronze and AK Black.  One new black 30 round Magpul P-MAG AKM magazine is included.  It is the exact firearm shown in the pictures.  It has been properly headspaced with Go and No-Go gauges, function tested with live ammo and test fired only.  It will ship with a signed inspection form.  The rifle will be shipped UPS ground with $900 insurance.  More insurance may be added at your request.  I will only ship to a legal FFL in your state.  The firearm will be shipped with an invoice, a copy of my FFL and an inspection form.  Please see the attached pictures for more details and feel free to contact me if you haveany questions.  I have a Class 07 FFL and Class 02 SOT.  Copies can be provided upon request.  Please do not bid if it is illegal for you to possess this firearm.  Thanks for looking and good luck!

SPECIFICATIONS:

Manufacturer:             -Fowler Precision Arms (www.fowlerarms.com)

Receiver:                    -Fowler Precision Arms from a Childers Guns 80% blank.

BCG:.                         -Toolcraft Manufacturing (One of the top AR-15 OEM BCG providers.  Long time Mil-Spec provider of M4 and M16 bolt carrier assemblies).  AK components are built to AR-15 mil-spwc standards.

Barrel:                        -16 inch chrome lined, Hammer Forged, Green Mountain Barrel with M14x1LH muzzle threads.

Caliber:                      -7.62x39mm

Trigger:                      -ALG AKT-EL Enhanced tuned to two stage.

Muzzle Device:          -Dead Air Armament Keymount Flash Hider

Finish:                        -Cerakote (Midnight Bronze and AK Black)

CLONE OF EARLY RUSSIAN MADE BULGARIAN T3 AK47

($2,850.00)

(SOLD: NO LONGER AVAILABLE)

FEATURES:

-Matching numbers Bulgarian surplus T3 AK-47 parts kit build.
-AK-Builder.com chrome lined, threaded, screw in barrel.
-ALG Enhanced AK trigger, polished and 2 stage tuned.  Note:  A more historically correct G2 style trigger may be installed at the buyers request.
-Polished Tortort Manufacturing correct T3 receiver.
-Hot salt blue finish.
-Russian T3 furniture set.
-Laser engraved proof markings copied from original Russian T3 receiver stub.
-Russian and Bulgarian factory marks consistent with early Russian manufactured Bulgarian issue service rifles

This rifle has been headspace with GO and NO-GO gauges and test fired.  An inspection form will be included.  Please see the attached pictures for more details and feel free to contact me if you have any questions.  I have a Class 07 FFL and Class 02 SOT.  Copies can be provided upon request.  Please do not bid if it is illegal for you to possess this firearm.  Thanks for looking and good luck!

SPECIFICATIONS:

Manufacturer:             -Fowler Precision Arms (www.fowlerarms.com)

Receiver:                    -Tortort Manufacturing.  Tortort serial number does not match the original.parts kit number.

Barrel:                        -16 inch chrome lined, Hammer Forged, AK-Builder.com thread on T3 with M14x1LH muzzle threads.

Caliber:                      -7.62x39mm

Trigger:                      -ALG AKT-EL Enhanced polished and tuned to two stage.

Muzzle Device:          -AK-Builder.com US slant brake.

Finish:                        -Hot salt Bluing by Precision Bluing in North Carolina.

Magazine:                 -Not included.  AK mags are common and easily obtainable.

Contact Us

CLONE OF EARLY BULGARIAN AR-M1 OR AK74 5.56 NATO

$2100.00

(SOLD: NO LONGER AVAILABLE)

This is a parts kit build of sorts, made from a variety of nations high quality surplus parts and US 922R components.  It is a slightly used rifle that has had a very recent Cerakote finish.  It has been headspaced with proper SAAMI spec Go and No-Go gauges and test fired.  It will ship with a factor inspection form.  It functions flawlessly.  All rivets are flush with the receiver and properly formed.  All blocks are straight and the front sight zeroes in the center of the front sight base.  The action is smooth and magazines function properly.  It comes with one 30 round WBP 5.56 magazine and one 20 round WBP 5.56 magazine.

FEATURES:

-Near exact clone of a early Bulgarian AR-M1 or AK-74.
-All Matching Numbers, Including the Receiver.
-Major parts Nitride finished under Cerakote Finish.
-Laser Engraved Replica Selector Markings, Factory Markings and Proof Marks.
-5.56 NATO Green Mountain Barrel.  Nitrided with precision 11 degree target crown.
-Nicely tuned and polished Carolina Shooter Supply Trigger Group.  Essentially a Tapco G2.
-Receiver started as a Polish Stamping Childer's Guns Blank.
-Nice Walnut (Handguards) and hardwood Bulgarian furniture set.
-East German Bolt Carrier.
-Polish Beryl 5.56 Bolt.
-Bulgarian Chrome Lined 24mm AK74 Muzzle Brake.
-Most other parts are Bulgarian.

Contact Us